Saturday, June 30, 2012

The Most Efficient Way to Heat a Basement

Many homeowners prefer to have a basement in the house. That is because the basement can be used for all kinds of purposes. For example, you can use it for entertainment, work, research, etc. The only problem is, when the weather gets cold, you have to have some way of heating up the basement so that you can continue using it even when temperatures are low.

In general, there are many different ways you can heat up a basement. Some are more efficient than others, simply because of the way heat is generated. Usually, the more energy efficient heating systems adopt some kind of method that draws heat from the environment. In recent years, more and more homeowners are becoming aware of such methods. That is mainly due to greater environmental awareness, and larger cost savings.

Conventional ways of heating up a basement include using a fireplace, or an electrical heat source. Heat can be easily generated from electricity. You can have a radiator system that helps to spread heat more evenly around the basement. For large basements, a heavy duty electric heater would be ideal.

For fireplaces, you may want to include a blower to achieve the same result. Ultimately, the heating system that you install depends on the area that you want to heat. Do you want to keep the entire basement warm? Or do you just want to keep a small area cozy? That answer lies in what you are going to do in the basement.

But perhaps the most efficient way to heat a basement would be the geothermal system. Geothermal systems may not be as common as electric heaters, as they are more complicated when compared with ordinary heating systems.

When the weather is cold, the ground surface may be cold, but the layers underneath have stored up lots of heat energy. The heat is untapped, and geothermal systems attempt to draw heat from beneath the ground. Water is used as the medium to tap into the heat energy. Via underground ducts or pipes, the water travels deep into the ground and stays there till its warmed up. The water is then transported back up, and the heat energy can be dispersed throughout the basement floors and walls.

In fact, this system is so energy efficient that the Environment Protection Agency (EPA) estimated a savings of between 20 to 50 percent. The only problem with the geothermal system is that it may require higher upfront investment. Mostly, the cost goes into installing the tubing. If you want to cut cost, you may want to install plastic tubing. However, in the long run, an energy efficient heating system can help you save on utilities bills.

If budget is the chief concern, then perhaps ceramic heating systems will suit you best.



For more information on heating a basement visit Home Heating Systems Help.

Thursday, June 28, 2012

14 Fireplace Grate Heater Heat Exchanger HOT Air Blower durability test.

14 Fireplace Grate Heater Heat Exchanger HOT Air Blower durability test. Video Clips. Duration : 1.02 Mins.


14 Fireplace Grate Heater Heat Exchanger HOT Air Blower durability test.

Tuesday, June 26, 2012

Fireplace Grates Blowers

A fireplace grate blower is a device that will increase the flow of warmed air into your room and home. While these come in a couple of different forms one being a fireplace insert and another common less expensive type is a tubular grate blower.

Fireplace grates with blowers operate on a very simple principle. Take in cool air and heat the air in the tubing and blow it out with a fan into the room to distribute the warmed air thus increasing the room temperature. A fireplace on its own will contribute warmth to a room but the actual efficiency is very low. Some poorly designed hearths will allow all of the warmth to go up the flue and not contribute to the home heating. I have been in one house where the fireplace took with its draft, warmth from the home up the flue. Using a fireplace blower will greatly increase the fireplace efficiency many times. The return on investment will be seen quickly on your heating bill.

The process itself is straight forward. The unit is placed into the hearth. Remove the old cast iron fireplace grate first; then, set in the new blower. This unit does require electricity and you may need to have an electrician run a power outlet appropriate for the application. When ready to use,build a fire directly onto the grate. The special heat resistant tubing is designed just for this. The fan is then turned on and the air coming in the air intake will be quickly heated to as hot as five hundred degrees. The air is then pushed back into the room. This will increase the temperature in the room. Other helpers in the process for the home could be the use of ceiling fans for circulation and something as inexpensive as a box fan to move warm air from one room to another.

While using the fireplace to help or be the sole heating of your home, other safety precautions need to be observed. First and foremost is at least a single fireplace screen. This is the first line in fireplace safety. Secondly, use of a hearth rug of fiberglass will increase your safety factor many times. These are non-flammable and are very sturdy rugs. Another option would be a wool hearth rug.

Please remember to have the flue checked and cleaned by a professional, burn hard dry wood and enjoy your family time around the home hearth.

James Dahlberg



Jim Dahlberg is the author/owner of Fireplace Accessories Plus. He has over 25 years commercial experience in the firewood industry. Fireplace Accessories Plus carries a wide selection from fireplace screen to fireplace rugs. View a selection of Fireplace Grates and Blowers here.

Sunday, June 24, 2012

Fireplace Single Blower

Fireplace Single Blower Review


Fireplace Single Blower

Fireplace Single Blower Feature

  • Magnetic Mount, Simple to install
  • 84 CFM
  • Fits most fireplaces

"Buy Fireplace Single Blower" Overview

Universal Fireplace Blower SystemYou will not be disappointed with Fireplace Single Blower

Related Products

For more INFORMATION

....Check price...Product Rating..Customer Reviews





Friday, June 22, 2012

FBK-250 Fireplace Blower Kit Installation

FBK-250 Fireplace Blower Kit Installation Tube. Duration : 4.22 Mins.


Installation of FBK-250 fireplace blower kit by www.fireplaceblowersonline.com. Please send any questions and/or comments to support@fireplaceblowersonline.com

Wednesday, June 20, 2012

Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme

Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme Review


Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme

Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme Feature

  • Includes blower, power cord, velcro strips, speed control, thermal switch
  • 130 CFM, 1250 RPM; Flange Opening = 9.5" 0.86 amps, 115 Volts
  • Overall Length = 13" Overall Length = 15"; Height 4.25"; Width 4.25"  Height = 4.50'
  • Motor on right side
  • 1 Year Manufacture Warranty

"Buy Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme" Overview

These are designed to be replacements for the listed blower model number. The blowers are aftermarket models-not original equipment. Be sure to compare the dimensions listed, to your unit, to be sure it will fit. The blowers are "contractor kits" with limited instructions. Intended to be installed by a qualified technician. One Year Warranty.You will not be disappointed with Fireplace Blower for Heatilator, Majestic FK4, GFK4, Northern Flame/Top Vent Direct; Rotom Replaceme

Related Products

For more INFORMATION

....Check price...Product Rating..Customer Reviews





Saturday, June 16, 2012

Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8

Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8 Review


Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8

Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8 Feature

  • Overall length 14 3/4"  Height 4 13/16" Depth 3 5/8"
  • 2806RPM; 223CFM
  • Automatic Overload Protection
  • .51 amps @ 115 Volts 60hz
  • One Year Manufacture Warranty

"Buy Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8" Overview

Non Reversible - Blower has no power cord or switch. Fasco Model 7021-6108 (4C826 discontinued-this is the replacement)You will not be disappointed with Dayton Low Profile Blower 115 Volt for Fireplace or Wood Stove (4C826) Model 1TDU8

Related Products

For more INFORMATION

....Check price...Product Rating..Customer Reviews